










Conveyor x ray scanner maintenance precautions
2022/06/22
Any equipment needs to pay attention to maintenance issues in use, and conveyor x ray scanner as a dangerous goods detection equipment is also widely used in our lives. We should also understand some maintenance items of conveyor x ray scanner.
First of all, during the maintenance process of the conveyor x ray scanner, foreign objects and water droplets cannot enter the equipment, so as to avoid damage to the security inspection machine equipment or safety accidents. Also, note the following:
1. Conveyor x ray scanner equipment with a working voltage of 220V. Ordinary maintenance must be carried out when the power is off. If you want to operate it with electricity, it must be carried out by personnel who have undergone relevant training on the conveyor x ray scanner, and you must do a good job in preventing electric shock.
2. There are a large number of sophisticated electronic devices in the conveyor x ray scanner equipment. Before maintenance, it is necessary to make preparations to prevent electrostatic damage to the conveyor x ray scanner device.
3. The conveyor x ray scanner equipment has lead protective layers to prevent radiation leakage in many places. During the operation, you should wear cotton gloves. If you cannot wear gloves, you should wash your hands immediately after work.
4. Before the conveyor x ray scanner equipment is powered on, it should be carefully checked to confirm that the wiring is correct, and there is no wrong connection or short circuit.
5. Before the conveyor x ray scanner turns on the ray, cover the cover to avoid personal injury caused by the irradiation of the ray.
Conveyor x ray scanner involves a lot of maintenance matters, and these are mainly daily operations. We must pay attention to precautions when using conveyor x ray scanner, so that conveyor x ray scanner can operate normally and safety inspection work put it in place.
Похожие новости